PMC Pm25LV010 Serial Flash Memory  With 25 MHz SPI Bus Interface 8-pin JEDEC SOIC

Description:

The Pm25LV010 is 512 Kbit/1 Mbits 3.0 Volt-only serial Flash memories. The device is designed to use a single low voltage, range from 2.7 Volt to 3.6 Volt, power supply to perform read, erase and programoperations.The devices can be programmed in standard EPROM programmers as well.
The device is optimized for use in many commercial applications where low-power and low-voltage operation are essential. The Pm25LV010 is enabled through the Chip Enable pin (CE#) and accessed via a 3-wire interface consisting of Serial Data Input (Sl), Serial Data Output (SO), and Serial Clock (SCK). All write cycles are completely self-timed.

Features:

• Single Power Supply Operation
  Low voltage range: 2.7 V - 3.6 V
• Memory Organization
  Pm25LV512: 64K x 8 (512 Kbit)
  Pm25LV010: 128K x 8 (1 Mbit)
• Cost Effective Sector/Block Architecture
• Serial Peripheral Interface (SPI) Compatible
  Supports SPI Modes 0 (0,0) and 3 (1,1)
• High Performance Read  25 MHz clock rate (maximum)
• Page Mode for Program Operation  256 bytes per page
• Block Write Protection
• Hardware Data Protection
• Page Program (up to 256 Bytes)
  Typical 2 ms per page program time
• Sector, Block and Chip Erase
• Build-in erase before programming
• High Product Endurance
• Manufacturer : Programmable Microelectronics Corp.
• Part Number :Pm25LV010
• Package : 8-pin JEDEC SOIC
• Similar items :Pm25LV512

Package Included:

• 1 x  PMC Pm25LV010 Serial Flash Memory  With 25 MHz SPI Bus Interface 8-pin JEDEC SOIC