3 Axis CNC Mill Kit TB6560 Stepping Driver + NEMA23 Stepper Motor *3

Features of Stepper Driver :

• Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !
• 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
• Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
• Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !
• On board current switching - Power output can be set according to specific user requirement !
• Full closed-type optical isolation to protect the user's computer and equipment
• Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
• 4 channel inputs interface- Can be used for XYZ limit and emergency stop !
• Professional design - Two stage signal processing with super anti-jamming !
• Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !
• Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !
• Universal architecture - Supports most parallel software MACH3,KCAM4 etc

Attention:

• Please connect the power supply to the power switch of 12-36 V, 8A
• The power output of 12V shall be applied to the radiator fan of 12V
• The interface of driver shall be connected with 2/4 phase, 4/6/8 leads stepper motor within 3A current
• This board can work with both unipolar and bipolar stepper motors
• The spindle motor is controlled by Parallel Interface. The voltage of the spindle motor must comply with the scope of the supply voltage.

Specifications of Stepper Driver:

Electrical properties (ambient temperature Tj = 25 pm)
Input Power	12 - 36V DC power supply
Stepper motor drive current	3A (peak value 3.5A)/axis
Drive type	Double-pole constant flow PWM actuation output
Compatible Stepper motors	2/4 Phase, 4/6/8 leads stepper motors within 3.5A

Specification of 57BYGH76-401A Stepper Motor:

• Step Angle Accuracy: +-5%(full step, no load)
• Resistance Accuracy: +-10%
• Inductance Accuracy: +-20%
• Temperature Rise: 80 Celsius CMax.(ratod current,2 phase on)
• Ambient Temperature: -10Celsius +50Celsius
• Insulation Class: B
• Dielectric Strength: 500V AC for one minute
• Shaft Radial Play: 0.06Max.(450g-load)
• Shaft Axial Play: 0.08Max.(450 9-load)

Package included:

• 1 x 3 Axis TB6560 Stepper Driver
• 3 x Nema 23 57BYGH76-401A Stepper Motor
• 5 x Wire connectors
• 1 x Cable
• 1 x CD software(English Manual & Mach 3)